 |
TRESPA
ATHLON for Washrooms, Changing Rooms, Wet Areas & Swimming
Pools
CLEANING - General
The recommended method for everyday cleaning of Trespa Athlon
panels is warm water with a mild universal cleaning agent
applied with a sponge or soft nylon brush. This is the ideal
way to remove most light, recent soiling. Dry damp surfaces
with an absorbent cloth.
Use of strongly acidic, caustic or abrasive cleaning agents
is not recommended.
Removing persistant soiling
Heavier, stubborn stains, such as felt pen, lipstick, shoe
polish, water-soluble paint, nicotine and urine, should be
lathered with a solution of hot water and a universal detergent,
or soap-based cleaning agent and, depending on the degree
of dirt, left to soak. Then rinse with clean water and dry
with an absorbent cloth.
Alternatively, the panels can be steam cleaned.
Occasionally, it may be necessary to remove old stains or
very stubborn marks with a liquid cleaner containing very
fine polishing particles or with bleach. (Beware: this may
damage the surface) Wash the surface down thoroughly afterwards
with clean water and dry with an absorbent cloth.
Removing specific types of stains
CAUTION!
Always follow the manufacturer's instructions carefully when
using any cleaning agent or disinfectant.
Using a combination of products may cause unwanted chemical
reactions, which produce harmful gases.
When surfaces have been cleaned with aggressive cleaning agents,
they should be rinsed well to dilute the cleaning agent and
prevent it from drying on the panel surface.
For more information please download the Trespa
Interior Cleaning brochure.
|
 |
 |
|
|